SP98 Ceramic Pressure Transmitter
The SP98 dry and flush mounted ceramic pressure sensor uses an aluminum oxide ceramic sensor as a “dry cell” that is extremely resistant to overload, aggressive mediums, extreme min/max temperature, applicationswithsolidparticlesandlowpressureranges. Asopposedto the 316SS. piezoresistive cells filled with oil, the process pressure acts directly on the ceramic diaphragm. It is designed to be installed at the bottom of the tank.
Ceramic cells do not expand and contract nearly as much as metal, ensuring good temperature stability. Common features of the SP98 are low hysteresis, high repeatability, immunity to the effects of process builds up and outstanding resistance to chemical attack. The SP98 is often specified for sanitary applications because if the ceramic cell is broken it will not contaminate the process medium.
The SP98 provides a 4-20mA output and its body is made of 316SS. Pressure ranges from -1 to 580PSI (-1 to 40 bar) gauge /absolute. Also available with optional 4…20mA + HART output.
- Produtos Químico, Tratamento de Água
- Produtos Alimentares e Bebidas
- Saneamento Básico e Sistema de Combate de Incêndio
- Indústria Farmacêutica
- Designed for reliable limit level detection of a wide range of fluids, oils, paste-like materials, foam, fibers and solids (including plastic pellets) with either high or low densities or dielectric constants.
- Generates a high frequency sensing field which is immune to product adhesion, making it an ideal solu- tion for viscous or sticky media such as ketchup, yogurt, syrups, creams or pastes, tar like materials, alkalis, etc.
- An ideal replacement for other technologies such as vibrating forks, capacitive, ultrasonic or conductive level switches.
- Direct mounting into tanks, vessels, pipes or containers.
Fully configurable sensitivity adjustment using a simple magnet pen - Universal design for all types of fluids (electrically conductive and non-conductive) with a sensing tip made from PEEK or PTFE.
- High stability at high sensitivity (can be used in applications with substances with εr ≥ 1.5).
Aplicação: Monitorar e detectar Fluxo de liquidos Alimentação: DC: 24Vcc (± 10%)
Consumo: <1 00mA
Saída:Relé (1 SPDT) 5A – 250Vac / 4~20mA (3 fios)
Regulagem (set point): Líquidos: 3cm/s a 1m/s
Precisão: erro ± 10%
Tempo de resposta: 1 a 10s
Gradiente de temperatura:15°C/min
Indicação visual: Bargraph 8 led ́s
Cabeçote: Aluminio com Pintura
Conexão elétrica: Prensa-cabo de 1⁄2” NPT
Conexão ao processo: BSP , NPT, Flange ou Sanitária
Material do corpo: Aço Inox 316
Temperatura Ambiente: -10 a 70°C
Temperatura de trabalho: -10 a + 80°C (c/ prolongador p/ 120°C) Pressão máxima:100 Bar
Classe de proteção: IP66
- ATEX
- CE
- EAC/TR CU
- IECEx
- Inmetro
- SIL 2 (Surface Mount Electronics)
- SIL 2 (Through-Hole Electronics)
- SIL (TUV)